Announcement

Collapse
No announcement yet.

Mikuni BS32SS Mounting Flange

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Mikuni BS32SS Mounting Flange

    Can anyone please tell me where I can buy a Mounting Flange for the Mikuni BS32SS Carbs on a 1982 Suzuki GS550L?

    Thank You , Jerry

    #2
    you mean intake boots? the rubber thingys between the engine and teh carbs? www.bikebandit.com ( you can get the part numbers there then go to http://www.ronayers.com/main.cfm to order them

    ryan
    78 GS1000 Yosh replica racer project
    82 Kat 1000 Project
    05 CRF450x
    10 990 ADV-R The big dirt bike

    P.S I don't check PM to often, email me if you need me.

    Comment


      #3
      Mikuni Carb Mounting Flanges

      I looked on bikebandit but I could'nt find the part number. How do I find what part number I need? Thanks , Jerry

      Comment


        #4
        you use the boxes at the top, first is OEM, second is 1982, third is suzuki, and fourth is gs550z it will then go to a page listing all the diagrams, for the intake boots you need to look at the head diagram.
        a small image will come up, you click on it and another window with a large image will come up.

        the part numbers you need are: 13110-47010 right side, two each
        13120-47010 left side, two each
        09280-38003 O-ring, four each

        Comment


          #5
          Mounting Flange

          Thank You for all of your help.I've been looking everywhere for these parts. Jerry

          Comment

          Working...
          X