Announcement
Collapse
No announcement yet.
new guy has no idea
Collapse
X
-
new guy has no idea
I picked up an 81gs 1000g a couple months back mostly to do the engine over this winter and swap it for the one in my daily rider. my bro has been driving it for about a month now without incident but lately it's been blowing gas and oil out of the breather tube. the previous owner has this tube unhooked from the air box and ran a longer tube back under the seat handy to the rear fender.. It takes a little while for the gas and oil to flow but comes out pretty heavy after the bike gets hot. my manual does'nt go into a lot of detail on this breather hose and I could not find a lot about it with the search. anybody know why this is happening?Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
If the engine has blow-by past the rings, it will huff and puff all kinds of fuel/oil vapor out the breather. You might want to do a compression check to see what kind of condition the engine is in.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
feelergaugephil
Mileage?????????????????????????
As stated above, do a compression check, if it's low, change out the piston rings, BUT measure the cylinders 1st, it may need a rebore! better to get hold of another set of jugs and pistons and throw the new rings on that if yours is past the service limits....
Comment
-
crazy canuck
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17441
- Indianapolis
Are the oil separators still under the breather cover on top of the valve cover? They're those little Brillo pad thingys tucked in there. Or that should be tucked in there.
Also, I know this is a radical thought, but why not attach the breather hose to the airbox as Suzuki intended?1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
-
feelergaugephil
Might be valve oil seals then, take off the tank, unbolt the airplane looking top off the camcover (what the breather hose connected to) (you'll need a new gasket when taken off) once the top is off look inside to see what condition the inside is, if it's completely oily, your going have to check your valve seats/seals.
What type of oil are you using in the engine?
Comment
-
Don-lo
Have you changed the oil lately? You may have gas in the oil, which vaporizes and takes some oil with it out that vent.
Comment
Comment