Reluctant to shift into 1st particularly when cold and a decided clunkyness going into 2nd .I have tried adjusting the clutch both at the handle and the screw thingy on the engine end . some improvement but looking for any suggestions?
Announcement
Collapse
No announcement yet.
Not a GS but Hopefull
Collapse
X
-
machinest
Not a GS but Hopefull
Girlfriend's sons 1981 Yamaha XS850 Shaft drive
Reluctant to shift into 1st particularly when cold and a decided clunkyness going into 2nd .I have tried adjusting the clutch both at the handle and the screw thingy on the engine end . some improvement but looking for any suggestions?Tags: None
-
Clone
Is it only when it is cold?
How does it shift when it is hot?
Does the clutch drag at temp, or when cold?
Does he have trouble finding neutral?
-
machinest
not only when cold but moreso than when hot
it shifts OK when hot a little rougher than my gs but that may be just unfamiliarity
the clutch dragged both at temp and when cold but I seem to have adjusted it to not do so as much.
no particular problem finding neutral
Comment
-
What condition is the oil in and what weight is it.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
How OLD is the oil?
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
cyclefvr2
hi- you might havea wore clutch basket, the part where the plates slide in might have grooves wore in it, this will keep the plates from opening and relesing, so you can shift of while stopped
you can file them flat again if not too bad,eventually you'll need a new basket
i have 2 xs 850 bikes im parting out if you need anything
1 is a special, the other is a xs
Comment
-
machinest
-
i would pull the clutch pack and take it apart inspect and cleaning all off with some carb cleaner, resoak in fresh oil and put it back together. should only cost a clutch cover gasket.78 GS1000 Yosh replica racer project
82 Kat 1000 Project
05 CRF450x
10 990 ADV-R The big dirt bike
P.S I don't check PM to often, email me if you need me.
Comment
Comment