.png "Powered by vBulletin")
I've got the tank off of my GS850 and I'm looking down at the tops of the CV carburaters and I see a small screw directly on the top of the carb body just before the boot--what am I looking at?
-
-
This one?
If that's the one you're asking about, the picture answers it.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
By Jove, that's the one. Is there an initial setting for those screws?Comment
-
set them at 2 turns out and go from there till the mixture is just right.I didnt do it I swear !!
--------------------------
1982 GS850G
1980 GS1100LComment
-
On an otherwise stock GS850, these usually end up somewhere around 3 turns out.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!Comment
Comment