Small leak on main gasket, any chance of making it stop?

[Skyboy8950]

1982 850G

I have a small leak on my main gasket (between crankcase and cylinders). I'm wondering if there is anything I can do about it besides tearing my engine down?

I know additives are bad. Is there a surface treatment I can do? Any tips would be great.

Thanks,

[almarconi]

Aside from replacing the gasket there is not much that can be done. You could try re- torquing the head bolts but its doubtful that would help.

[DimitriT]

I haven't heard of anyone fixing this without a headgasket. How many miles?

[TheCafeKid]

When you say small, how small is small?? Will it last you the rest of the season? You MIGHT try cleaning the area VERY VERY well and running a thin bead of clear, high temp silicone around it. It might last you the rest of the riding season, but it will likely need replaced this winter. Dont worry, its not TOOO tough. Also, double check you're not overfull on oil. Should NOT be over the "F" mark in the window. If it is, it will start to show you where the OTHER weak points in your gaskets are. If you are over full, drain a bit, it may help slow down that base gasket leak too..

[Skyboy8950]

The leak is slow. It will last me the season. Over time, it slowly wraps around to the sides of the engine, but only a thin coating. Haremph. I've pulled a head before, but not cyls. Gaskets are expensive too. Shoot.

[salty_monk]

When I looked you could get a full kit for $60 pattern.

Dan

[Skyboy8950]

When I looked you could get a full kit for $60 pattern.

Dan

Where?????