.png "Powered by vBulletin")
SEE if this uploads.It is a pic of the mystery screw.No help on using this camera yet.
-
-
I get nothin' -
Trying againComment
-
How to post picturess
Hi,
Reference this...
Posting Pictures To GSR
Thank you for your indulgence,
BassCliffComment
-
OK a picture . Screw was found inside the clutch cover the shim / washer is from the clutch basket which I slept before reassembly.The washer is concaved and do not remember which way it points.I believe this goes between the gear and rear spring assy on the clutch basket.When put on the rivets that were ground off are too short to reach back through the backing plate .Comment
-
As I recall, there are NO screws with pointy tips ANYWHERE on the stock bike.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Looks like a screw out of a heat and air duct.Comment
-
That looks like the screw that I use to pull the caps off over the idle mixture screws.
Somebody is messing with you!1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment