Announcement
Collapse
No announcement yet.
1980 gs1000s #1 cylinder trouble
Collapse
X
-
Big E
1980 gs1000s #1 cylinder trouble
I'm getting blowback out of the #1 cylinder to the point that it blows back through the #1 carb does anyone know what this may be? It also will pop when it does this,the bike is a restoration project I've started so I don't know much about its history.Tags: None
-
TheCafeKid
Yes yes, valve adjustment, compression check, and a FULL carb disassembly and cleaning, including replacing the necessary internal Orings, as well as the Orings around the intake boots, all of which can be obtained on the relatively cheap from this site
www.cycleorings.com
This gent, Robert Barr, is also a forum member, and has done A LOT for getting these bikes back on the road with offering up these rebuild oring kits... worth every penny.
Comment
-
Big E
thanks guys I have to work until this weekend but I will give it a shot then, and if you dont mind could you give me the clearance on the valves.
Comment
-
You will find all kinds of good info here... http://members.dslextreme.com/users/bikecliff/
Make sure you follow the valve adjustment procedure as stated in Basscliff's tutorial if you want the best results.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment