.png "Powered by vBulletin")
On my GSX 750 ES 1983,with OEM Nippon-Denso coils,Can i remove the plugwires? Seems to be some kind of clip on the coil where the cable goes in.
-
-
Yes, that model coil allows removing the wires although I don't think those clips are available and they are fragile.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Yes I just did it... 85 GS700ES has the same coils and clips, they ended up being so brittle and broke when taking them off. They (wires) just unscrew, you may have to trim down your new wires abit to get them in depending on what size wire you use. That reminds me that I still need to HOT glue or epoxy the new ones (Just to seal) them into the coils.Comment
-
Did mine too, you can pick up a 4 cyl accell set for cheap and put those wires in the coils, it is next to impossible to keep those clips from breaking.Comment
Comment