Fuel Hose routing

[Anonymous]

Ok guys finally got back to work on my 77gs750. I had pulled the carbs awhile back to clean now I am trying to figure out where all the fuel hoses go and hook back up. Still have a few gas leaks and this may be one of my problems.
Does anyone have a photo or diagram of how all of this hooksup. Waiting on my Clymers to be delivered, but I wanna fix it this week.

Thanks
Michael
Amarillo TX

[SqDancerLynn1]

Ok here goes 4 nipples on the float bowls are over flow- hoses routed towards the rear of the swingarm. Fuel line connects to the fitting between the #2 & 3 carb. Fitting on the carb slide body- # 2 & 4 are vents, route over the air box and down to the rear, #3 carb is the connection for the vacuum line for the petcock

[Anonymous]

Ah Ha!!

That explains a major problem there the number 3 carb. I'll try that here in a sec.

Thanks guys you're a life saver

Michael
77 gs750

[SqDancerLynn1]

It's a problem Older Slide carbs attach vacuum to the #3 carb. The BS type attach the vacuum to the #2 carb. It creats some confusion as to the atachment points