Rebuild

[Kitten Tooth]

I'm rebuilding a 1982 GS300L D model.

I wanted to know if anyone had any ugly and/or cheap side covers for that model to sell, Preferably not cracked or broken.

I also need some rubber boots that connect the Carbs to the engine. Mine are old and cracked.

If anyone has either of those items to sell or can point me to someone who has some to sell I would very much appreciate it if you let me know. I can't wait to get the thing back on the road.


Kitten Tooth

[Big T]

http://www.partshark.com/fiche_section_detail.asp

[Texas Don]

If you haven't done so already, you might try posting in the parts wanted forum. I've had great luck scoring some needed parts there although with the carb boots, you really need to just spring for new, flexible ones.
Don

[Kitten Tooth]

Thanks for the heads up man. Ill give it a shot.

[Big T]

Be sure you order all the parts you need

For intake, order boots (#20,#21), O rings ( 2 X #22) and clamps ( 2 x #25).

Since they're still available, you might try your local dealer. Mine allows you to order on line and pick up, so no shipping charges

[Kitten Tooth]

Wicked, i check that out.

[duaneage]

See if you can use 450L covers and move emblems. The 300L is a rare bike and body work might be tough to come by.