Resistance of Dyna coils please

[GregT]

Hi all, I have a GS1000 racebike here which was purchased with a Dyna ignition fitted - or at least the rotor and trigger units. It has what I think are GSX1100 coils fitted. When received it gave a reasonable spark but the longer we run it the more I think there's a coil mismatch as there are unmistakeable coil breakdown symptoms.
Can anyone supply me with the resistance figures for genuine Dyna coils ?
Out here at the end of the world - New Zealand - Dyna coils are not just a phone call away. We may end up having to order a pair in but I'd like to know the figures anyway

Thanks

Greg T

[salty_monk]

Green coils are 3 ohms. They also do a blue?? 5ohm set & a grey 2ohm set for use with the Dyna 2000 from memory.

Dyna S will run fine with anything greater than 3 ohm fitted. 5ohm will supposedly give a less hot spark but never had any issues...

Dan

[Steve]

Here is the spec sheet, straight from their web site.

.

[GregT]

Thanks very much guys - that was just what I needed.

Greg T