Announcement
Collapse
No announcement yet.
GS850L(T) Front end
Collapse
X
-
nycs10011
GS850L(T) Front end
So my bike got obliterated while parked by a truck and I have to replace the whole front end. I'm wondering what other years and models are compatible with the GS850L(T)Tags: None
-
I'm not 100% certain, but I think the only thing you need to watch out for is to make sure you get the forks from another L model. The Axle is in front of the fork tubes, not at the end. Keep track of what you get. The forks look the same from year to year, but the internals change.
If you find it will work, or you can't find better, I have a triple tree from an '83 850 GL, and a set of chronically leaky '80 forks. Rust pits in the chrome wear the left seal out in about 4000 miles. PM me if you think you can use them. Better ones do turn up on ebay, that's how I replaced mine.
Edit: Come to think of it, I have all of that '83 front end, except turn signals. The headlight chrome isn't great, but might clean up. The wheel is an '83, so the spokes won't match your rear wheel. I put my indicator on it before disassembly, so I know it's straight within service limits. One of the rotor bolts is broken off. A good shop should be able to get it out without having to repair the thread. I do have the matching rear wheel, but it's bent. The '83 fork tubes look grim, but I never tried to clean them up.Last edited by Dogma; 08-11-2009, 02:09 PM.Dogma
--
O LORD, be gracious to me; heal me, for I have sinned against you! - David
Skeptical scrutiny is the means, in both science and religion, by which deep insights can be winnowed from deep nonsense. - Carl Sagan
--
'80 GS850 GLT
'80 GS1000 GT
'01 ZRX1200R
How to get a "What's New" feed without the Vortex, and without permanently quitting the Vortex
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
The 1000GL and 1100GL forks will work as well as 850 forks, so you can use this information and expand your search.
Good luck and sorry to hear about this problem.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
nycs10011
Good to hear a 1000 or 1100 front end would work too. Hell of a time to be taken off the road but I'm just thankful I wasn't on her when the truck decided to use her as a speed bump.
Comment
Comment