Announcement

Collapse
No announcement yet.

@#%$ - Pilot Air Screw - GS1100ET

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    @#%$ - Pilot Air Screw - GS1100ET

    I was messing around with an old set of BS34SS carbs from a '80 GS1100.

    Pilot air screws were seriously frozen. With tender care I coaxed three free.
    No-go on #4, the head stripped out. So I verrrry carefully drilled it and removed it with a tiny easy-out.

    Sooooo,
    Does anyone have a donor GS1100ET carb set...with an intact pilot air screw?
    Or know where I can find one.
    Obviously not a dealer item...as it had an EPA anti-tamper seal plug over it!

    #2
    Try messaging Chef1366. he might have a pilot screw for you. or you could try blowerbike
    I didnt do it I swear !!

    --------------------------
    http://i1210.photobucket.com/albums/...Picture003.jpg 1982 GS850G

    http://i1210.photobucket.com/albums/...n1/Picture.jpg 1980 GS1100L

    Comment


      #3
      I have some.
      I also have a complete set of rebuilt 34mm CVs that I'm selling.
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment


        #4
        Gee, sooo much trouble. Seeing as how you are so close, I could take that headache(engine) from you

        Comment

        Working...
        X