Announcement

Collapse
No announcement yet.

1982 GS850-L choke lever question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1982 GS850-L choke lever question

    I am looking at a GS850-L which has a jury rigged choke that leads up to the left handle bar (uses two hose clamps, and the foam rubber from an old grip). It works currently, but I would like to replace that in the future.

    Just saw this part on ebay and had two questions:

    1. Is this the right part that I am looking for. Says it is but one never knows (still waiting on the shop manuals)

    2. How does this get hooked up and how does it work? Looks like there are several wires with a blue wire harness of some sort, and the cable has been cut short?!?!?



    Thanks guys
    Chris
    Last edited by Guest; 08-24-2009, 08:20 AM.

    #2
    Hi Chris,

    Welcome to the forum - I have an '82 GS850GL, and that e-bay control looks right (although not in very good condition).

    It's not showing the actual choke cable however, the wiring harness from the switch goes into the back of the headlight & controls the turn signals, headlight dimmer & the horn. The choke lever on the bottom of the switch is screwed into the housing (with an o-ring to keep tension) and has a separate "choke" cable that is attached to the lever, routed down the bar, along the frame under the tank, and down to the choke rail on the carbs.

    If all you need is the choke lever assy then it's an easy switch to remove it from the e-bay one & attach it to your current left hand swith assy, assuming all the other electrical stuff works in yours...

    In any event, sounds like you will need to get a new choke cable as a minimum - here's link to one of the cheaper places to get parts:



    Also, you can use the suzuki p/n's shown in the various parts fiche to compare against different years & models for part compatibility.

    Good luck - we need lots of pics of your bike!!

    Mike
    '85 GS550L - SOLD
    '85 GS550E - SOLD
    '82 GS650GL - SOLD
    '81 GS750L - SOLD
    '82 GS850GL - trusty steed
    '80 GS1100L - son's project bike
    '82 GS1100G - SOLD
    '81 GS1100E - Big Red (daily rider)

    Comment


      #3
      As usual an excellent picture. (Not) It looks like the correct LH switch to me. The blue connector goes under the tank into the main harness. There is also a clutch safety switch wire I do not see and you will also need the choke cable unless yours is still usable.
      82 GS850L - The Original http://s224.photobucket.com/albums/d...ePics067-1.jpg
      81 GS1000L - Brown County Hooligan http://s224.photobucket.com/albums/d...ivePics071.jpg
      83 GS1100L - Super Slab Machine http://s224.photobucket.com/albums/d...t=DCP_1887.jpg
      06 KLR650 - "The Clown Bike" :eek: http://s224.photobucket.com/albums/d...nt=SERally.jpg
      AKA "Mr Awesome" ;)

      Comment


        #4
        Maybe I should hold off for now and see if I can come up with a different solution. $10 shipping for a small part that I am not sure that I need...I am buying the bike today, so I can't remember off hand what is on there??

        I hope a few more (in better shape) will come on the market before too long

        Thanks for the help guys
        Chris

        Comment

        Working...
        X