.png "Powered by vBulletin")
Fuel Valve O Ring?
Where might one aquire an o ring for the fuel valve inlet?
Ive looked on Z1 and cant find one.
thanks guys
Ive looked on Z1 and cant find one.
thanks guys
-
-
I found o rings at Lowes that seem to work OK for petcocks. Plumbing section. PM Robert Barr on this site and ask him if he has one.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely -
Dealer or any internet Suzuki dealer1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
Im a bit hesitant to use hardware store rubbers. i bought some from my local ACE hardware that worked great........ untill they didnt.Originally posted by duaneage View Post
I just pulled my carbs apart and found the rubber eaten away.Comment
-
If you're talking about the float valve inlet I have one.
Get an entire set from Mr. Barr
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment