Announcement

Collapse
No announcement yet.

No suction (petcock) slides not moving

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    No suction (petcock) slides not moving

    Okay, so i just rebuilt my carbs tonight and put em back on the bike.
    Went to fire it up and it was a pain, as usuall, as the dry carbs filled up.

    I got it to fire but only after covering intakes to get sduckion going.
    Once it fired, noticed the slides were not moving up and down as it should.

    Also noticed that im hardly getting aby suction from the #3 carb petcock port.

    I ran through the carbs again and am not noticing anything out of the norm.

    Anyone know if im missing something somewhere?

    #2
    For one thing the vacuum fitting is on number two.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      yeah....... thata what i said none the less............

      Comment


        #4
        Im seriously confused. Its running, ideling well, bliped the throttle and it revs up well, but still no movement in any of the slides.

        Comment


          #5
          Turns out i am getting suction out of that carb, enough to flow fuel.

          Comment

          Working...
          X