Announcement

Collapse
No announcement yet.

need carbureetor cleaning and repair pictures for the VM 24 carb mikuni

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    need carbureetor cleaning and repair pictures for the VM 24 carb mikuni

    I would like to know what site or location can I find for the vm24 Mikuni carbs the
    step by step directions with pictures for cleaning the vm 24 Mikuni carbs, please advise

    carbureetor cleaning and repair pictures for the VM 24 carb style

    Thanks,
    Your friend, Mel
    melalice2004@aol.com

    #2
    This should get you started. http://www.thegsresources.com/files/vm_carb_rebuild.pdf

    You will need an o-ring kit from cycleorings.com, and get intake boot O-rings as well. For gaskets, Z1 Enterprises is a forum favorite.

    BTW, Suzuki did not use VM24 carbs on any GS bikes. Where did you get such a set of carbs, and what kind of bike are you working on?
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      didn't they use them on the 550's or was that 22mm

      Comment


        #4
        There isnt any available on the internet that I know of. Id buy a set on Ebay and keep the one set together if your worried about screwing them up, then yould have 1 set to go by. Take some cell phone pictures as you go so you can see how it was

        Comment

        Working...
        X