Announcement
Collapse
No announcement yet.
1981 gs 1000 l carb parts
Collapse
X
-
mac65
1981 gs 1000 l carb parts
Hello,picked up a new project last night 81 gs1000l no airbox 2 sets of carbs and misc stuff in a box,tank is pretty strait seat is good has 4 in 1 kerker but i seem to be missing bracket on carbs that holds throttle cable and choke cable got it running today fabbad up plate for throttle didnt need choke fired right up seems to run ok in shop but cant ride yet was wondering if anyone had that little bracket to spare? I got her for 325 motor sounds strong no smoke i think i done okLast edited by Guest; 09-03-2009, 10:29 PM.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
I have those pieces. Drop me a PM if you want to discuss.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Be careful, you will burn up the motor with that Kerker and pods if you don't jet it right.
I know about these things.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
mac65
Comment
-
I would start out with 125 main jets and shim the needle by removing the plastic spacer and adding one or two washers.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment