16 valve GS750 engine ID

[Guest]

I hope to id this engine as I need to get some parts for it. The ID # on the engine is
GS75X 113353
It has wiring for shift position indicator with large plug, has the same ignition connector as the 1981 GS1100 chassis that it is mounted in, chrome rectangular cam cap covers with 2 screws each also like GS1100.
Thanks for looking

Glenn

[Larry D]

I hope to id this engine as I need to get some parts for it. The ID # on the engine is
GS75X 113353
It has wiring for shift position indicator with large plug, has the same ignition connector as the 1981 GS1100 chassis that it is mounted in, chrome rectangular cam cap covers with 2 screws each also like GS1100.
Thanks for looking

Glenn

The '80-'82 GS750 engines are the same, which is what you have. What parts are you looking for ?

[bradleymaynar]

Not sure if you have the entire bike from your post, but if you do and it has a square (rectangular) headlight, I believe it's and '80 or '81.

Brad bk

[ehra]

Stator is first on the list. 80-82 same, 83 is different. I am selling this bike and want to give the new owner as much information as I can.
This engine is in an 81 GS1100 bike, unknown what the engine came out of.
Thanks

[bradleymaynar]

Try this site. http://statewidegovrecords.com/vin-u...20&cmp=msnvinb

Brad bk

[76FJ55]

basically everthing is the same on the 80-82 gsx750 with the exception tot eh bolt patern on the valve cover. the 80 and 81 have the valve cover bolts along the front and back of the engine in line with the edge of the head disregarding the cam tower. with 4 bolts along the fron and 4 along the back edge.
80-81


the 82 has bolts located forward on the edges of the cam chain tower. with 6 bolts along the fron and 6 along the back edge.
82

[ehra]

Thank you.
The valve cover has 4 bolts on front and rear edges. 80-81 now I can order a stator and get a new GS rider on the road.