Announcement

Collapse
No announcement yet.

Which Petcock to choose?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by cdaniel0808 View Post
    Would it be possible to widen the holes in the KL18-4358 to fit my hole spacing. It's 44mm and I assume that is center to center. My bolts are about 51mm and so it's only 7mm or about 1/4" off. If I could reem out the untapped holes on the KL18 without getting into the seal, it would work, but I can find a picture of the KL18 that shows the seal pattern.
    No - won't work. Your holes are 50mm centre to centre - if you drill out the holes on the 44mm tap it will leak.

    The tap never came with a handle. Just use a small screwdriver or a key to turn to prime (and back again when it starts - don't leave it on prime).
    79 GS1000S
    79 GS1000S (another one)
    80 GSX750
    80 GS550
    80 CB650 cafe racer
    75 PC50 - the one with OHV and pedals...
    75 TS100 - being ridden (suicidally) by my father

    Comment


      #17
      The GS550L petcock discussion has been moved here:


      Thank you all for your help!

      Comment

      Working...
      X