Announcement

Collapse
No announcement yet.

It lives

Collapse
X
Collapse
 
  • Page of 11
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 7 8 9 10 11 template Next
    #136
    Don't do it Bill. Those pistons are too pretty to cover in carbon. Good luck with this one.

    Have you weighed your pistons? I see the rods on the 1150 crank are colour coded differently. Probably vary in weight from the factory so it may be a reason for the customary vibration of most of the 1150 engines.
    :) The road to hell is paved with good intentions......................................

    GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
    GS 850GT JE 1023 11-1 pistons. Sold
    GS1150ES3 stock, V&H 4-1. Sold
    GS1100GD, future resto project. Sold

    http://i155.photobucket.com/albums/s...s/P1000001.jpg
    http://i155.photobucket.com/albums/s...s/P1000581.jpg

    Comment

      #137
      Originally posted by 49er View Post
      Don't do it Bill. Those pistons are too pretty to cover in carbon. Good luck with this one.

      Have you weighed your pistons? I see the rods on the 1150 crank are colour coded differently. Probably vary in weight from the factory so it may be a reason for the customary vibration of most of the 1150 engines.
      No I didn't weigh the pistons.
      I can tomorrow though.
      First time you saw 1150 crank porn Ian?
      How's the b-day going?
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment

        #138
        Originally posted by chef1366 View Post
        No I didn't weigh the pistons.
        I can tomorrow though.
        First time you saw 1150 crank porn Ian?
        How's the b-day going?
        Yeah 1150 crank porn is ok, but I'm not planning on pulling mine down anytime soon. The BD went great thanks. You guys are still a day behind us then?

        With CNC machined pistons, there's very little weight difference. That's probably why the big bore engines vibrate more than stock, when matched up to odd weighted rods. The factory probably matches the piston weights to the rod weights to maintain balance.
        :) The road to hell is paved with good intentions......................................

        GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
        GS 850GT JE 1023 11-1 pistons. Sold
        GS1150ES3 stock, V&H 4-1. Sold
        GS1100GD, future resto project. Sold

        http://i155.photobucket.com/albums/s...s/P1000001.jpg
        http://i155.photobucket.com/albums/s...s/P1000581.jpg

        Comment

          #139
          Originally posted by 49er View Post
          Yeah 1150 crank porn is ok, but I'm not planning on pulling mine down anytime soon. The BD went great thanks. You guys are still a day behind us then?

          With CNC machined pistons, there's very little weight difference. That's probably why the big bore engines vibrate more than stock, when matched up to odd weighted rods. The factory probably matches the piston weights to the rod weights to maintain balance.
          Is today tomorow?
          1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
          1985 GS1150ES stock with 85 Red E bodywork.

          Comment

            #140
            Originally posted by chef1366 View Post
            Is today tomorow?
            No, today was yesterday!!
            :) The road to hell is paved with good intentions......................................

            GS 850GN JE 894 10.5-1 pistons, Barnett Clutch, C-W 4-1, B-B MPD Ignition, Progressive suspension, Sport Demons. Sold
            GS 850GT JE 1023 11-1 pistons. Sold
            GS1150ES3 stock, V&H 4-1. Sold
            GS1100GD, future resto project. Sold

            http://i155.photobucket.com/albums/s...s/P1000001.jpg
            http://i155.photobucket.com/albums/s...s/P1000581.jpg

            Comment

              #141
              Nice pics

              Sheesh... wish I had a workshop tha tI could do the kind of work you guys do... sadly I do not have such an option available to me....yet.L ucky for me engine look asside these things just eat up the miles regardless. With a little TLC here and there.

              Those pics wow, that is some serious bling cannot wait to see this puppy in action.

              Comment

                #142
                Looking good Bill.

                Question: how about O-ringing that cylinder to increase seal durability? The cylinder on my recently sold big bore kit was O-ringed and it seemed to seal well. Hate to see another engine of yours go up in smoke.
                Ed

                To measure is to know.

                Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                Comment

                  #143
                  Originally posted by Nessism View Post
                  Looking good Bill.

                  Question: how about O-ringing that cylinder to increase seal durability? The cylinder on my recently sold big bore kit was O-ringed and it seemed to seal well. Hate to see another engine of yours go up in smoke.
                  If I didn't have stock sleeves or had high compression pistons I'd o-ring.
                  Shoot I'm using copper gaskets. It will leak a little. Oil that is.
                  1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                  1985 GS1150ES stock with 85 Red E bodywork.

                  Comment

                    #144
                    Got the top cases painted today and got an oil pan cleaned and ready to paint. The pan looked like it had been the mud for ten years.




                    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                    1985 GS1150ES stock with 85 Red E bodywork.

                    Comment

                      #145
                      Looking awesome Chef!
                      What is your projected "on the road" date?
                      sigpic

                      82 GS850
                      78 GS1000
                      04 HD Fatboy

                      ...............................____
                      .................________-|___\____
                      ..;.;;.:;:;.,;.|__(O)___|____/_(O)|

                      Comment

                        #146
                        Originally posted by Octain View Post
                        Looking awesome Chef!
                        What is your projected "on the road" date?
                        I could do it in a day but am taking my time. I'm also on Kris's schedule. He works afternoons/evening so I've been heading up in the morning before he has to go to work. He lives forty miles away so a good morning ride is always nice. Plus it's in the mountains so double the nice.
                        Two to three weeks I'd say.
                        1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                        1985 GS1150ES stock with 85 Red E bodywork.

                        Comment

                          #147
                          Oh I know all about that taking time thing.

                          I'm sure you'll keep us posted.
                          sigpic

                          82 GS850
                          78 GS1000
                          04 HD Fatboy

                          ...............................____
                          .................________-|___\____
                          ..;.;;.:;:;.,;.|__(O)___|____/_(O)|

                          Comment

                            #148
                            damn,
                            i thought only billy vose and tommy steadman painted there chassis that shade of blue
                            also,
                            that looks like elvis standing behind the turbo bike
                            ahhh,
                            i can smell the desert air once again

                            Comment

                              #149
                              Hmmm I didnt think Wiseco made pistons in the right bore and pin size for your 1230
                              They are wiseco arent they?
                              Ahhh just remembered you are using an 1150 crank with bigger wristpins, DOH!!

                              Comment

                                #150
                                Are you using the same 0.340 cams? What are you going to degree them at. I thought i read you were gonna go 105/107.
                                Thats what I have mine at now and whoever said pods and 4-1 dont make torque is dead wrong, mine has TONS of bottom end and mid. My .340 web cams should be arriving this week and i am debating where to degree mine at. Any input from the experts? Sorry if its a bit of a highjack, Bill

                                Comment

                                Previous 1 7 8 9 10 11 template Next
                                Working...
                                X