Announcement
Collapse
No announcement yet.
which wiring harness
Collapse
X
-
WVRockMan
which wiring harness
I am going to replace the wiring harness on my 79 gs 1000e and was wondering what other bikes harness's will work? Does any one have one foe sell fairly cheap? It doesnt have to be perfect, just one that will not envolve me rewireing it from from to back. The one that is on it now has been burnt and butchered. Any and all help is appreciated.Tags: None
-
I have a harness from a 80 GS750E and one from a 82 GS850GL.
Im not sure what it would take to get either of them to work.
Maybe someone else does...
Lemme know if you're interested.sigpic
82 GS850
78 GS1000
04 HD Fatboy
...............................____
.................________-|___\____
..;.;;.:;:;.,;.|__(O)___|____/_(O)|
-
WVRockMan
Any one else have any input? Or have a harness at a resonable price that is an exact match. Come on I know your out there.
Comment
-
BassCliff
Hi,
Don't forget to post in the "Parts Wanted" section and look around on Ebay. Check my website for a procedure to cross-reference part numbers.
Thank you for your indulgence,
BassCliff
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35698
- Torrance, CA
Someone posted a thread about GS1000 wire harnesses a week or so ago and when checking ebay I found about half a dozen different harnesses that would be a direct swap. I suggest you head over and search "GS1000 harness". Good luck.
Edit: http://cgi.ebay.com/ebaymotors/1979-...4506.m20.l1116
This one is from a 1000G but it will require a fair bit of rework in order to work... http://cgi.ebay.com/ebaymotors/81-Su...4506.m20.l1116Last edited by Nessism; 09-26-2009, 12:11 AM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
WVRockMan
i have found several as well on ebay. The ones that look the best al seems to be for a 750. I am guessing that they would be a direct fit if they are of the 76, 77, 78, 79 models years? I was also looking to go as cheap as I could while still getting a decent harness. Just trying to pinch pennies.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35698
- Torrance, CA
Originally posted by WVRockMan View Posti have found several as well on ebay. The ones that look the best al seems to be for a 750. I am guessing that they would be a direct fit if they are of the 76, 77, 78, 79 models years? I was also looking to go as cheap as I could while still getting a decent harness. Just trying to pinch pennies.
BTW, I adapted a 1000G harness to work in my 1000S. I had to switch over plugs for the IP and coils, extend the tail light harness run, and play around with various other wires until everything achieved a happy fit. It was a lot of work but was unavoidable since a proper harness was not available. You would be ahead of the curve if you just find the right harness to begin with.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment