Announcement

Collapse
No announcement yet.

gas tanks that fit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    gas tanks that fit

    can someone tell me if a gas tank off an 83 GS850L will fit an 81 GS1000L. I tried looking at online fiche but that part is discontinued. Appreciate it.
    Rob
    1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
    Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

    #2
    Originally posted by azr View Post
    can someone tell me if a gas tank off an 83 GS850L will fit an 81 GS1000L. I tried looking at online fiche but that part is discontinued. Appreciate it.
    Im interested in the answer to this one as well. I'd love to put an L tank on my 82-G.
    sigpic

    82 GS850
    78 GS1000
    04 HD Fatboy

    ...............................____
    .................________-|___\____
    ..;.;;.:;:;.,;.|__(O)___|____/_(O)|

    Comment


      #3
      Originally posted by Octain View Post
      Im interested in the answer to this one as well. I'd love to put an L tank on my 82-G.
      I'd like to adapt a G tank to my L. I'd like the extra capacity. I know I'd have to do some mods, but if the tunnel in the tank would fit, it'd just be minor welding for the rest of the mounting of the tank...

      Comment


        #4
        Originally posted by DanTheMan View Post
        I'd like to adapt a G tank to my L. I'd like the extra capacity. I know I'd have to do some mods, but if the tunnel in the tank would fit, it'd just be minor welding for the rest of the mounting of the tank...
        It seems that the tanks from different models and same years would be a direct swap. No way Zuke changed frame mounts from model to model?

        I dont really care about capacity but I do care about looks and flow of the bike lines.
        The G tanks are ugly as sin in my opnion.
        sigpic

        82 GS850
        78 GS1000
        04 HD Fatboy

        ...............................____
        .................________-|___\____
        ..;.;;.:;:;.,;.|__(O)___|____/_(O)|

        Comment


          #5
          They moved the mounting pin on the front of the frame aft about three inches for the L models. The forward location for the pin on the frame is still there, so a little welding would do it.

          Putting an L tank on the G should be similar.

          The original question 850L to 1100L tanks, I think they are the same, but not sure.
          http://img.photobucket.com/albums/v5...tatesMap-1.jpg

          Life is too short to ride an L.

          Comment


            #6
            Originally posted by Octain View Post
            It seems that the tanks from different models and same years would be a direct swap. No way Zuke changed frame mounts from model to model?

            I dont really care about capacity but I do care about looks and flow of the bike lines.
            The G tanks are ugly as sin in my opnion.
            The mountings are different between models. Actually, the best way to do what I want is to have my tank expanded upwards to keep the same lines. Someone on here did it and it looked good.
            Hey, to the OP, sorry about the thread jack.

            Comment


              #7
              I put a 79' 850G tank on an 82 1100 L....had to move the tabs forward for the rubber mounts.....also leaves a gap under the tank above the sidecover...the rear mounting tab also needed to be fabbed

              Bike was bought as a basket case....without the L tank....still trying to find one.....nice to have the extra fuel though....

              Comment


                #8
                I put my 81 GS750L on my 79 GS1000L and it bolted right up, was snug to get on, but it did fit. And I tried the 79's on my 81 and it was a lil looser, but still fit well when bolted. Hope this helps.

                Comment


                  #9
                  I think they changed the rear mounts in '82, so you would be better off to find an '81 or older tank, if you can. Then it should bolt right up.
                  Might be that they only changed the mounts for the G tanks, not really sure about the Ls.

                  .
                  sigpic
                  mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                  hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                  #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                  #2 son: 1980 GS1000G
                  Family Portrait
                  Siblings and Spouses
                  Mom's first ride
                  Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                  (Click on my username in the upper-left corner for e-mail info.)

                  Comment

                  Working...
                  X