Hose Retainer on Carb Gang

[BeerMonger]

Sorry for the bad image quality. I'm putting my carb gang back together and don't remember where this hose retainer goes. I had it with the parts from carb 1, but doesn't look like it makes sense. Does it hold the fuel line, or the breather tube that runs to the air box?

Thanks in advance, my search turned up nothing.

Edit: It's a 82 850g

[tkent02]

It goes between 1 and 2, holds the clutch cable in place. Two of the mounting screws have washers, they are for this.

[BeerMonger]

Thanks a bunch!

[Steve]

Here ya go. Part #79, bottom of the picture.
They show it in front of carb #2, but all the ones I have seen were in the gap between #1 and #2.
I guess it would depend on just where your clutch cable needs to be held, but as shown in this picture, it would be held right where the carb throat is.

[BeerMonger]

As I was re-assembling, I was able to see where the retainer clip was sitting because it had left little indents in the carb gang channel. It was were tkent said, spanning between 1 and 2. I confirmed this in the garage with the clutch cable routing.