Announcement

Collapse
No announcement yet.

Carb Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Carb Question

    1981 GS850GX - What does the screw on the bottom of the float bowl do? Not the four in the corners, but the big one in the middle? Is it a drain or does it adjust the float or something?

    #2
    It's a drain.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      So should I open that from time to time to remove any crud that may be built up in there?

      Comment


        #4
        That wouldn't be a bad idea, but mainly if you know the bike is going to be sitting for a long period of time, its a good idea to drain the float bowls as well.

        Comment


          #5
          Originally posted by Buster-boy View Post
          So should I open that from time to time to remove any crud that may be built up in there?
          You could, but if you use the bike regularly and have a good filter on the intake of the petcock and use decent gasoline, there should be no need.

          I have not removed the drain plug on any of my bikes, yet. The only time I have had to remove one was on someone else's bike where I was trying to determine whether gas was getting to the carbs, so I pulled one of the drains to verify.

          Yes, I live in an area where we have snow, so the bikes will sit for a few months before being ridden again. If I choose to winterize a bike, I will add Sta-Bil or Seafoam to the gas tank, run the bike around the block (about 10 miles) to make sure that the treated gas has gotten to all parts of the carbs, then change the oil and park the bike. I have never had to remove the drain plug for storage or resurrection in the spring.

          .
          sigpic
          mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
          hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
          #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
          #2 son: 1980 GS1000G
          Family Portrait
          Siblings and Spouses
          Mom's first ride
          Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
          (Click on my username in the upper-left corner for e-mail info.)

          Comment

          Working...
          X