gs 850 rear wheel spacers

[johnnyjon]

hi. ive phoned a few breakers in my area and for some reason they have no rear wheel spacers for my gs 850. the spacers i am talking about are the ones either side of the rear caliper mounting bracket. i would be very grateful if some one has there wheel off if they could measure the sizes for me with some vernier calipers so i can make some on my lathe.

many thanks
jon

[2BRacing]

My wheel is not off, but I have measured the spacers as best I could. The outer one is 33 mm outside diameter by 17 mm thick with hole for axle I think 15 mm diameter (could not measure axle diameter). The inner spacer has a more complex shape, starting off at 38 mm outside diameter and tapering down to 28 mm outside diameter, with total length 23.5 mm. I will try and draw the shape and send you the sketch.

[Piston720]

Good Morning
Check out ebay #270461156357

[johnnyjon]

thanks for your help guys, those ones on ebay are cheap but the postage to the uk aint good.

2BRacing: the sketch is good and they will be no trouble to make. thankyou for going out of your way to do that for me

[pl2112]

These are from a GS1000S, probably the same though? I remade mine in stainless.

Might help

Cheers!