heres a couple pics for the hell of it.
Announcement
Collapse
No announcement yet.
help diagnosing a gs1100e
Collapse
X
-
axonz
help diagnosing a gs1100e
well if u saw my first post on here me and my father own a 1983 gs1100e and its been sitting in the shed for a little over a year now, right off the bat the bike needs a battery. but what i want to know is what are some things i should do to try and crank her up, for example should i use some carb cleaning liquid clean the intake? any suggestions plz.
heres a couple pics for the hell of it.
Tags: None
-
81gs1100
One thing I would do before anything else is remove the float bowl drains and check the condition of the gas in the bowls if any, check the tops of the drain bolts for goop. If all is clean and looks good, I would say try to fire it up.
If there is alot of deposit and sticky varnish goop, then pull the carbs
-
Man......I wish I could just go pull one of those out of a shed.....
How long since it was started ? You may get away with draining the gas and put some Seafoam in with new gas, charging the battery and hit the start button. It may just start right up !!!
Afterwards you should change ALL the fluids, new filters, plugs, etc........Larry D
1980 GS450S
1981 GS450S
2003 Heritage Softtail
Comment
-
sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Originally posted by axonz View Postwell if u saw my first post on here me and my father own a 1983 gs1100e and its been sitting in the shed for a little over a year now, right off the bat the bike needs a battery. but what i want to know is what are some things i should do to try and crank her up, for example should i use some carb cleaning liquid clean the intake? any suggestions plz.
heres a couple pics for the hell of it.
Hey wait a minute; did U just get done clear coating that bodywork???
No way it could look that good .
Be safe but that looks like a bunch of fun. These bikes have more motor than suspension so keep that in mind when going for the gusto
Comment
Comment