Wheel Bearings fittment.

[81gs1100]

Ok its me again, time to hopfully find someone that knows.

I just was checking over my 81 GS1100E and noticed the front wheel bearings are bad.

I was just wondering if anyone knew the measurments of these bearings, or maybe a part number other the Suzuki.

I was planning on running to NAPA for the bearings if I can find the correct measurments from someone here. I just hate to have to pull the wheel knock out the bearings and then run around and try to find some, I would rather keep the bike rolling till I find the right size.

So, if anyone knows the bearing part number or the measurments of the front wheel bearings please let me know. I plan to get this bike to the DMV tomorrow and this is throwing a wrench in my works here.

[81gs1100]

6302 2RS Sound about right?

[asetech]

15X42X13 that is the measurement from bike bandit. If you have a local bearing house you could take them the measurements and they should have some.

[81gs1100]

Bearing 6302 2RS


Dim:15.000 x 42.000 x 13.000
Desc.: Deep Groove Ball
Brand: 6302 2RS, Premium
Dynamic Load (kN):
11.40
Static Load (kN):
5.45
Speed (RPM):
Grease
17,000
Oil
21,000


I guess thats right then
</H3>

[SqDancerLynn1]

Try this site

http://cgi.ebay.com/ebaymotors/REAR-WHEEL-Bearing-Kit-SUZUKI-GS-850-G-GS850G-1979-83_W0QQitemZ390089179948QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item5ad320832c&_trksid=p4506.c0.m245