.png "Powered by vBulletin")
In the carb cleaning pictures he has no little plastic half dome screen when he shows the needle jet seat. I do and didn't put it in the dip cuz it did not want to slip off easy and I was afraid it would break. Is that Ok ? 
-
[SIGPIC1980 GS1000E
Yamaharley Roadstar Silverado.2008sigpic -
That's not the needle jet. -
That is your secondary fuel filter, and it is mounted to your float valve, not your needle jet.
Of all the things to not dip, that is probably the one that will hurt the least.
(Your primary fuel filter is inside the tank, on the inlet pipe to the petcock.)
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Form a soccer goal with a towel and with a small screwdriver push out on a notch on the small screen towards the goal and
GOOOOOOAAAAAALLLLLLLL!!!!!!1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment