Announcement

Collapse
No announcement yet.

Trying to fix an oil leak...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trying to fix an oil leak...

    Hello!

    I am the proud new owner of an 81 GS250 and I'm having a great time getting it all tuned up and running like new

    However, I'm stuck fixing an oil leak because I can't seem to find the name of the specific part I need to replace.

    Take a look at the attached picture and let me know if you can point me in the right direction...

    Thanks!

    Dave

    #2
    Right crank seal.
    Part number 09283-22015
    Last edited by chef1366; 10-20-2009, 02:23 AM.
    1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
    1985 GS1150ES stock with 85 Red E bodywork.

    Comment


      #3
      RH oil seal pn 09282-14001, located on the crankshaft parts diagram

      Comment


        #4
        Part is on its way -- thanks a million!

        Dave

        Comment


          #5
          Originally posted by KidA81 View Post
          Part is on its way -- thanks a million!

          Dave
          I just tried to install the equivalent part and failed twice befor getting the 3rd one to install.

          Recommend cooling the seal in a freezer so the metal contracts and drive the seal in straight after being well greased. If not it will leak worse than it did.

          Comment

          Working...
          X