Help a weakling out
Announcement
Collapse
No announcement yet.
cant get bike on center stand
Collapse
X
-
texaninseattle
cant get bike on center stand
I know i am opening myself up for some ribbing here, but what is the trick to getting my '83 gs850 up onto the center stand? I just dont seem hoss enough to do it.
Help a weakling outTags: None
-
1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES
Comment
-
jbs80106
Its technique....
I always get my 650 up on center stand while straddling it. Lean forward towards handle bars w/front brake engaged. Stand on center stand and transfer weight backwards. Works....but I think its resulting in my handle bars getting a bit wiggly.
My BMW conveniently has a handle that's right under the seat and I can do it from the side quite easily.
I was always afraid that the GS would topple over to the other side when using the grab bar under the seat on the left side. Now that I've more experience I can do it from the side now too.
Practice practice practice....swearing helps too.
Comment
-
1_v8_merc
Dont feel bad, my center stand is very badly worn down, i usually need to get my brother to help me put it on the center stand, because im scared of using too much force and dropping the bike.
my dad has already dropped my bike TWICE, once riding it and once trying to move it, and i've had to replace the brake lever and the clutch lever and fix one corner light already.....so i REALLY dont feel like taking any risks of dropping her again......knowing my luck.
Comment
-
fenderfreek
I couldn't figure the thing out either the first time I tried one. Ended up finding a video on Youtube.
Left hand on handlebar, right hand on grab bar or some frame part right above the rear tire, one foot on center stand (all your weight here), then pull up with the right hand, and back with the left hand. Lean a little back and to your right, let physics do the rest.
Comment
-
DanTheMan
And if your rear shocks are kind of saggy, got too much weight on the bike, roll it up on top of a flat 2x4, then do the above mentioned methods and it'll be on the centrestand.
Comment
-
rkubik
also, before you start heaving, lean the bike to make sure both feet of the c-stand are hitting the ground - makes it a lot easier.
Comment
-
oshanac
Tip- try to raise her up on asphalt or on a rubber rug (the flat thin kind). The stand will slide on concrete.
Comment
-
And if y'all want some more practice, I'll let you come practice on my 900-pound Wing.
Actually, I think it's easier than my wife's 850L.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
jwhelan65
Do not try and horse it back with both hands on the handlebars, simply step straight down on the extended pedal and pull up with you right hand on the passenger handle and your left on the handlebar. Piece a cake.
Comment
-
It's the only stand I use on my 650L, the side stand is actually harder for me to get my fat #13 boot on. If you follow the tips given (left side of bike, right foot on center stand peg, and right hand on the grab rail) you'll almost laugh, yes laugh, on how easy it really is. As mentioned...do NOT use the handle bar/ monkey yank to raise the bike, it kills the adjustment splines on the triples and you'll be looking for a new set of those AND another set of bars.
Comment
-
Put all your weght on the lever sticking out the left side of the center stand. Jerk the handlebars towards you. Wallah
If you get it halfway use the front brake to stop backward motion and jerk the bars again to finish the job.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
nert
its not you. i have 3 1982 gs1100glz bikes. one is cake to get on the center stand, one is an all out beech, and the other takes (3) progressive greater rocking motions to get her up. the bottom of my foot aches for days. I get more workout than i do at the gym. All (3) are the same bike. all standard trim, just different colors. The blue one is the hardest. what color is your bike?
Comment
Comment