Announcement

Collapse
No announcement yet.

Air Screw + Stuck in carb body.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    It must be Factory Stock to glue 1 of 4.

    I used an 'easy-out'. (Not easy)
    Last resort, moanin' & groanin'.
    Last edited by Guest; 03-16-2010, 08:53 PM.

    Comment


      #17
      I had that problem !

      I used paint stripper and bought a better screw driver. It came slow I could only turn it a little at a time, kept soaking it and working it in and out. It would turn a little farther each time. Then it was out. I think Chef1366 told me to do that
      [SIGPIC1980 GS1000E
      Yamaharley Roadstar Silverado.2008sigpic

      Comment

      Working...
      X