Announcement

Collapse
No announcement yet.

Pilot Jet question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Pilot Jet question

    I have a badly stripped Pilot Jet, so i'm ordering 4 new ones.
    (they only sell them in 4's anyways)

    I'm ordering from Babbitts, and they say everything is OEM.

    I just wanted to make sure their jets are better quality than those crappy "rebuild kits" out there....anyone know?

    ----

    The reason im asking this, is because everyone says to avoid the crappy rebuild kits.....and that's the ONLY other place I can find Jets at....but I don't wanna pay $100 for 4 entire kits, when i only need the Pilot Jets.

    I know these "kits" have crappy float bowl gaskets, however, what bout the jet quality in these kits?


    ----

    Should I just order my jets seperately from babbitt, or just buy some rebuild kits from another website, and use the Jets and throw away the gaskets?

    ----

    Any comments would be helpful, thanks!

    #2
    Check out these guys. I called them once and was told that they are Mikuni stock parts. You might want to call them yourself.

    Larry D
    1980 GS450S
    1981 GS450S
    2003 Heritage Softtail

    Comment


      #3
      Or there's these guys in the UK. Absolutely top notch blokes:
      79 GS1000S
      79 GS1000S (another one)
      80 GSX750
      80 GS550
      80 CB650 cafe racer
      75 PC50 - the one with OHV and pedals...
      75 TS100 - being ridden (suicidally) by my father

      Comment


        #4
        First of all, WHAT BIKE ARE YOU TALKING ABOUT???

        Second, try here:
        Motorcycle Carbs
        or
        PJ Motorsports
        or
        Carb Kit Capital

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          I use these guys. The web site is full of useful parts and tuning info on mikuni and kehin carbs http://www.motorcyclecarbs.com/

          Comment


            #6
            Haha, relax, its a 82 GS650G

            I revised what i wrote earlier, and accidentily deleted the GS650 part.
            (not that it's exactly needed to answer the question anyways)

            Comment


              #7
              Denniskirk.com sells Mikuni jets at a good price. They sell two packs also.
              1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
              1985 GS1150ES stock with 85 Red E bodywork.

              Comment


                #8
                Thanks for all the sources guys!

                It doesn't look like im ordering from babbitt's now, I went to confirm order, and they're estimated shipping time was like 2 weeks! And they wanted ****ing $15 to ship 4 Pilot Jets and Plugs!!!!

                NOOOWAAYYYY

                Hell....i'd rather go to the local suzuki shop down the road, they'll get me what I want in 2 days, no shipping charges.

                Im going to check the links you guys posted first though!

                Comment


                  #9
                  If your local dealer is a Parts Unlimited distributor, they also have the OEM Mikuni pilots. I got mine from the dealer for about $ 3 each as I recall with no shipping.
                  82 GS850L - The Original http://s224.photobucket.com/albums/d...ePics067-1.jpg
                  81 GS1000L - Brown County Hooligan http://s224.photobucket.com/albums/d...ivePics071.jpg
                  83 GS1100L - Super Slab Machine http://s224.photobucket.com/albums/d...t=DCP_1887.jpg
                  06 KLR650 - "The Clown Bike" :eek: http://s224.photobucket.com/albums/d...nt=SERally.jpg
                  AKA "Mr Awesome" ;)

                  Comment


                    #10
                    Originally posted by twr1776 View Post
                    If your local dealer is a Parts Unlimited distributor, they also have the OEM Mikuni pilots. I got mine from the dealer for about $ 3 each as I recall with no shipping.
                    Oh really?

                    I've ordered bowl gaskets from them, the guy behind the counter didn't know if they were going to be made by Suzuki, or Mikuni.....luckily they were Mikuni's......so I'm hoping everything else they sell is good stuff.

                    Comment


                      #11
                      Originally posted by 1_v8_merc View Post
                      (not that it's exactly needed to answer the question anyways)
                      On the contrary, my friend, there are different pilot jets for the VM carbs and the BS carbs.

                      Just another reason that we ask, plead, even beg you guys, please put a location in your profile and your bike in your sig line.

                      .
                      sigpic
                      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                      #2 son: 1980 GS1000G
                      Family Portrait
                      Siblings and Spouses
                      Mom's first ride
                      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                      (Click on my username in the upper-left corner for e-mail info.)

                      Comment


                        #12
                        #10 Today, 05:30 PM 1_v8_merc
                        Oh really? I've ordered bowl gaskets from them, the guy behind the counter didn't know if they were going to be made by Suzuki, or Mikuni.....luckily they were Mikuni's......so I'm hoping everything else they sell is good stuff.
                        As Steve mentioned without your bike in your signature line we are unable to know which carbs you have. Here is a link to Parts Unlimited's catalog. Use the PU part number when you order and that way you can be sure to get the Mikuni parts you want. I never let the counter person look up part numbers.

                        82 GS850L - The Original http://s224.photobucket.com/albums/d...ePics067-1.jpg
                        81 GS1000L - Brown County Hooligan http://s224.photobucket.com/albums/d...ivePics071.jpg
                        83 GS1100L - Super Slab Machine http://s224.photobucket.com/albums/d...t=DCP_1887.jpg
                        06 KLR650 - "The Clown Bike" :eek: http://s224.photobucket.com/albums/d...nt=SERally.jpg
                        AKA "Mr Awesome" ;)

                        Comment


                          #13
                          Denniskirk.com sells Mikuni jets at a good price. They sell two packs also.
                          +1..Thats where I buy Mikuni jets. I think they were $20 for all 4 jets. Shipping is free over $100 so I usually wait until I need enough stuff so I can get free shipping.

                          Comment

                          Working...
                          X