Announcement

Collapse
No announcement yet.

heating a carb in the oven

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    i've been periodically squirting in pb blaster (i had a couple of freebie cans). i figured it couldn't hurt. i have a propane torch and could try that. thanks for the tips, i'm sure i'll get the screw out with one of these methods.

    what is a good source for getting a replacement mix screw. i pretty much stripped out the head that had a previously good start on being ruined.

    Comment


      #17
      I believe Z1 may carry replacement ones... call them
      '85 GS550L - SOLD
      '85 GS550E - SOLD
      '82 GS650GL - SOLD
      '81 GS750L - SOLD
      '82 GS850GL - trusty steed
      '80 GS1100L - son's project bike
      '82 GS1100G - SOLD
      '81 GS1100E - Big Red (daily rider)

      Comment

      Working...
      X