Announcement
Collapse
No announcement yet.
'79 850 Wheels
Collapse
X
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
This issue is well covered in the archives but in a nutshell, tubeless wheels have an extra lip which keeps the tire seated on the bead in case of deflation. The '79 - '81 850's came with a mix and match of tube type and tubeless type wheels over the years in a grab bag sort of application - look for "tubeless applicable" cast into the wheel, since there is no consistency in what any particular bike has. Some people go tubeless with tube type wheels by changing to a tubeless valve stem, doing this is somewhat controversial though so you might want to check the archives for both sides of the story.Last edited by Nessism; 12-12-2009, 11:54 AM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
my '79 front/rear wheels are stamped tubeless. I've read some '79's rears are tubeless and fronts have tubes so i checked to confirm my case.1979 GS850G
2004 SV650N track bike
2005 TT-R125 pit bike
LRRS #246 / Northeast Cycles / Woodcraft / Armour Bodies / Hindle Exhaust / Central Mass Powersport
http://s327.photobucket.com/albums/k443/tas850g/
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Originally posted by tas850g View Postmy '79 front/rear wheels are stamped tubeless. I've read some '79's rears are tubeless and fronts have tubes so i checked to confirm my case.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Grandpa
The front wheels off later 850's (82 and 83 GS850GZ and GS850GD) are interchangeable with those on the earlier 850's.
It's possible that the wheels on tas850G's bike are those from the later 850's. The later 850 front wheel is clearly marked as tubeless.
By the way, any front wheel on any GS850G or GL, GS1000G or GL, or GS1100G or GL, or GK, will interchange.
They are not the same, but they'll fit any 850, 1000, or 1100 shaftie with no modifications.
Nick Diaz
Middletown, MD
Comment
-
Originally posted by Grandpa View PostBy the way, any front wheel on any GS850G or GL, GS1000G or GL, or GS1100G or GL, or GK, will interchange.
They are not the same, but they'll fit any 850, 1000, or 1100 shaftie with no modifications.
Up through '81, the shafties all had the "star" pattern wheels. Starting in '82, they had the "spoke" pattern.
Not sure where the change came in regarding width, but I am sure that the 1000 and 1100s had a 2.15" wheel,
the smaller bikes (yeah, at least down to the 650) had a 1.85" wheel.
For those that don't know the difference in the pattern, compare the pictures in my signature.
"Freebie" has the "star" wheels, #2 son's bike has the "spokes".
They are both '81 850s, but we got a set of wheels off an '82 1100 for #2 son. (That includes the 2.15" front wheel. )
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
The '82+ G model 850 and 1100 have the tubeless 2.15" spoke front wheel but the GL and 1100E both have a 1.85 front. Guess Suzuki gave the larger wheel to those bikes that were apt to be loaded with a fairing. As for the star pattern fronts, I don't think they made a 2.15 wheel, and the parts fishe supports this thought.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
I am inclined to agree on all points. My wife's '82 850L has the "spoke" pattern and is 1.85" wide.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment