Name That Carb Piece

[qwqb]

Hey guys,

So I'm working on cleaning/rebuilding my carbs, and as I was handling the carb body, a small piece fell out and I didn't see where it came from. It is a small, black ring, with a mesh (filter?) in the middle. I didn't see any mention of this piece in the gsr carb cleaning series.

[Steve]

That is your secondary fuel filter that sits over the float valve.

Actually, it should snap on top of the float valve.

.

[qwqb]

ah, ok! thanks for your attention to my never-ending barrage of questions!

[Steve]

That's the only way you are going to learn, unless you just beat yourself to death, trying to figure something out.

.

[79FiveFifty]

That is your secondary fuel filter that sits over the float valve.

Actually, it should snap on top of the float valve.

.

Was this a CV thing or what? I didn't have this part

[Steve]

Was this a CV thing or what? I didn't have this part

Although he does not have it listed, I happen to know that he has an '81 bike, and it should have CV carbs.

You don't have your bike listed, either, but at least your username is a clue.
If you ever get a different bike, you will have to remember to mention it, it's just easier to be lazy and put it in your sig.

.

[79FiveFifty]

Haha, you are right! Yes, my username is my bike if I change bikes I will have to update sig, or change names.

Thanks for clearing that up, I wanted to make sure I was not missing anything inside my VM carbs.