Announcement

Collapse
No announcement yet.

Headlight Bulb

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Headlight Bulb

    Hello,
    Which bulb I use for my 80' GS450? Will the Sylvania Silverstar H4ST work for my bike too?
    The manual specifys 12v 35/35w.
    Thanks,

    #2
    That bulb would be fine. Many of us are using the automotive equivalent which I think is cheaper.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Your bike uses a sealed beam doesn't it ?

      Last edited by Guest; 12-28-2009, 11:03 AM.

      Comment


        #4
        Good point about the type of headlamp!

        If you have a sealed beam that measures 7" diameter, JC Whitney sells H4 assemblies that use a replacable bulb. I put one on a 550 and it worked well.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          oh, so I cant just replace a bulb-i have to replace the whole headlight peice?

          like this?


          or

          http://www.jcwhitney.com/Vision_Plus...;0;2021584;0;0#
          thanks
          Last edited by Guest; 12-28-2009, 11:31 AM.

          Comment


            #6
            With a sealed beam all you can replace is the entire light.
            1979 GS850G
            2004 SV650N track bike
            2005 TT-R125 pit bike
            LRRS #246 / Northeast Cycles / Woodcraft / Armour Bodies / Hindle Exhaust / Central Mass Powersport

            http://s327.photobucket.com/albums/k443/tas850g/

            Comment


              #7
              Originally posted by tas850g View Post
              With a sealed beam all you can replace is the entire light.
              or you can pry the bulb out of the reflector and jimmy a new one in there by gently bending the tabs back over the new bulb (after you snap off that big goofy aluminum housing that is spot-welded on to make it fit into a car). I've replaced my bulb with the car equivalent a few times this way and a replacement bulb is small enough to carry a spare in my tail cowling glove box.
              Be sure to not touch the new bulb, or clean it well before it is installed because the natural oils on your hand can compromise the integrity of the bulb when it heats up.

              One day I'm sure those tabs will break off and I'll replace the whole thing, but until then I will replace with what is convenient.

              Comment


                #8
                does anybody know a compatible headlight assembly?
                (brand/part number...)
                Thanks

                Comment


                  #9
                  I found a headlight and a spare for 20 dollars at a junkyard.
                  1981 GS650G , all the bike you need
                  1980 GS1000G Power corrupts, and absolute power corrupts absolutely

                  Comment


                    #10
                    i found a used headlight on ebay, its for a 1983 GS450 Automatic .Anybody know if this is the same headlights as my 80'GS450? Would it fit? Thanks,
                    Last edited by Guest; 12-30-2009, 09:06 PM.

                    Comment


                      #11
                      If not .. I will guess you could make it work.

                      I would consider looking for a headlight from a bigger Suzuki .. for the halogen bulb feature.

                      Comment


                        #12
                        thats a good idea, would one of those be compatible with the GS450?
                        Thanks,
                        DG

                        Comment


                          #13
                          May have to bend your mounting tabs a little .. but I would say yes

                          Then .. any parts store will have a spare for you .. and they will be brighter than your sealed beam ever will.

                          Originally posted by djg42 View Post
                          thats a good idea, would one of those be compatible with the GS450?
                          Thanks,
                          DG

                          Comment


                            #14
                            i picked up a sylvania enclosed headlight from autozone, but i didnt fit-it was way to big. is there a replacement some where that will fit a 80' GS450?

                            Comment


                              #15
                              You need to post up in the parts wanted section of the forum ..

                              Pull your entire headlamp assy and replace with one from a bigger bike.

                              Someone will be along to show you new aftermarket lights available too.

                              Comment

                              Working...
                              X