Announcement
Collapse
No announcement yet.
Valve cover hose
Collapse
X
-
bmac
-
I dont know the exact diameter but i just used a piece of vacuum line from the auot parts store. Measure the hole in the airbox nipple and get that size ID hose. As for the function. That tube acts as exactly like a PCV valve in your car.. relieves crankcase pressure and it even supplies some engine heat to the airbox. In theory it will help recycle unused combustion gasses and the engine heated air will suppress any "frosting" of the carbs in cold weather. Be sure the wire mesh is under the housing on the cam cover too.. that keeps oil from being sucked up into the tube.Last edited by chuck hahn; 01-09-2010, 09:35 AM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
Hi, diameter is 12mm or 1/2''.Its an antipollution thing.
Its like a pcv on an old car or truck.
Marchttps://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
1978 GS1000C X2
1978 GS1000E X2
1979 GS1000S
1979 gs1000
1983 gs400e
Comment
-
Originally posted by bmac View PostSteve????????????????
If I was home, I would simply go out to the garage and look at the label on the hose that I bought.
Since I am about 1000 miles away from home, I will, instead, go to the Alpha Sports site and note that the description says "HOSE, BREATHER (11X15X250)".
I guess that means that it's 11mm inside diameter, 15mm outside diameter and 250mm long.
Alpha's price for that hose is about $30, everyone else's is about $20, but it's better than it seems.
You actually get about 6 FEET of hose, which is much more than the 10 INCHES you need.
If you go to the auto parts store, you might find some 7/16" hose, but it's going to be much thicker-walled and hard to use.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
Originally posted by Steve View PostYes? I'm here (finally).
If I was home, I would simply go out to the garage and look at the label on the hose that I bought.
Since I am about 1000 miles away from home, I will, instead, go to the Alpha Sports site and note that the description says "HOSE, BREATHER (11X15X250)".
I guess that means that it's 11mm inside diameter, 15mm outside diameter and 250mm long.
Alpha's price for that hose is about $30, everyone else's is about $20, but it's better than it seems.
You actually get about 6 FEET of hose, which is much more than the 10 INCHES you need.
If you go to the auto parts store, you might find some 7/16" hose, but it's going to be much thicker-walled and hard to use.
.
Yes, the auto parts store hose is thicker but I bought some anyway for my bike. No F'ing way I'm paying $20+ for a piece of stink'in hose from Suzuki.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
I have some of that suzuki oem valve cover hose floating around if anyone is interested. The OEM hose is thin walled and when new is quite flexible. Any hose you find that fits at local auto parts store will have a fairly thick wall which will become rock hard over time especially in colder climatesLast edited by srsupertrap; 01-09-2010, 11:14 AM.Steve
1979 GS1000E (45 Yrs), 1981 GPz550 (11 Yrs)
Comment
-
Originally posted by Nessism View PostYes, the auto parts store hose is thicker but I bought some anyway for my bike. No F'ing way I'm paying $20+ for a piece of stink'in hose from Suzuki.
At the same time I "splurged", I kinda went overboard. I also got the proper vent hoses for the carbs, the proper vacuum hose for the petcock and the proper fuel hose. I'm tired of fighting auto parts hoses, the extra money is worth it to me. All of them except the carb vent hose have much more than you need for a single bike.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Silicone heater hose at the autoparts stay flexible, even here up north.
Marchttps://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
1978 GS1000C X2
1978 GS1000E X2
1979 GS1000S
1979 gs1000
1983 gs400e
Comment
-
Originally posted by kochic View PostSilicone heater hose at the autoparts stay flexible, even here up north.
Marc
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
I'll all for the OE fuel line and vacuum hose, just didn't feel like paying $25 for a length of hose.
So which one of you guys with "extra" valve cleaner hose wants send me a hunk?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by Nessism View PostSo which one of you guys with "extra" valve cleaner hose wants send me a hunk?
I might be home in about three weeks or so.
I'll be happy to send you some when I get there.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
Comment