Announcement

Collapse
No announcement yet.

Name that part

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Name that part

    I'm pretty sure it came from in or around the tach/speedo assembly but I can't find it on the fiche and didn't take pics when dismantling.



    Thanks
    Last edited by Guest; 01-12-2010, 12:33 AM. Reason: better photo
    Tags: None
    #2
    It would REALLY help if we could see it.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment

      #3
      had to get a better camera out... my new phones camera sucks out loud.

      Comment

        #4
        They are the metal inserts that go into the rubber bushings
        Steve

        1979 GS1000E (45 Yrs), 1981 GPz550 (11 Yrs)

        Comment

          #5
          That is a 453-094-09945.

          (aka "thumb") just teasing.....

          Sort of blurry though,

          No, yea the first pic is real blurry.

          Ahhhh okay, new pic, those.

          If there are screws that have rubber mounts to them in this assembly, they fit inside the rubber mounts I would guess.

          Comment

            #6
            Those look just like the inserts for the signal lights. They sit in the hole and the bolt goes through them then attaches to the signal light. Check it out.
            Rob
            1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
            Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533

            Comment

              #7
              Originally posted by srsupertrap View Post
              They are the metal inserts that go into the rubber bushings
              bingo we have a winner they go into the rubber bushings that hold the tach in place

              Comment

                #8
                And dont even post anything honda again ok?

                Comment

                  #9
                  Originally posted by sharpy View Post
                  And dont even post anything honda again ok?
                  only thing I could find to give it scale...

                  won't happen again

                  Comment

                    #10
                    lol, gonna say those are keys to a Honda, looks like the ones to my Fit.

                    Comment

                      #11
                      Originally posted by detorn View Post
                      only thing I could find to give it scale...
                      What, you don't have a key for your SUZUKI motorcycle???

                      .
                      sigpic
                      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                      #2 son: 1980 GS1000G
                      Family Portrait
                      Siblings and Spouses
                      Mom's first ride
                      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                      (Click on my username in the upper-left corner for e-mail info.)

                      Comment

                      Previous template Next
                      Working...
                      X