Diameter across the intake mouths of 32/34mm CV's (Outside)

[salty_monk]

Where the pod filters clamp... anyone know offhand?

Dan

[rphillips]

Don't have measurements, but I used the orig GS 1100 boots when I put GS 1150 carbs on my GS 1100, on both the inlet & outlet sides

[Steve]

I think they are different, which one do you really want?

EDIT: I just looked at the Z1 site, they both appear to be 54mm.

.

[nastyjones]

Yep, mine are 54 mm.

Paul

[salty_monk]

Perfect, I thought it was either 52 or 54mm so that confirms it.

On the CV's it's only the inner dia that changes, I just swapped a set of K&N's from a 34mm set to a 32mm set.

Cheers,

Dan

[Steve]

On the CV's it's only the inner dia that changes, ...

Maybe as far as the airflow path is concerned, but I know from experience that the slides are different, meaning that the caps over the diaphragms are different sizes, too.

.

[rphillips]

Sorry, another Tennessee question. Why would the covers over the diaphragms need to be larger, just because the slides are larger. Couldn't they install a "SLIGHTLY" larger slide on the same diaphragm, & everything else would be the same???

[Steve]

Yeah, you might think that, but these carbs grew in size over a few years.

That might explain why they didn't just size them all for the largest anticipated size and then just put smaller parts in the others.

.