![Confused](https://www.thegsresources.com/_forum/core/images/smilies/confused.png)
Announcement
Collapse
No announcement yet.
4th gear tranny noise
Collapse
X
-
4th gear tranny noise
So, I have put maybe 200kms on the new 1100 engine, and it makes a squealing, whining noise in 4th gear, and louder the more throttle I give it. All other gears are fine and it shifts through all gears fine. I do not know why the cases were split on this engine, maybe there was a shifting problem or somethingThe PO didnt say why or what was done to it, even if he could remember (24 years ago). Anyone know of a certain problem with 4th gear on these? I plan to run it for a few more hundred and if the noise hasnt gone away, then pull the bottom off and see what the problem is.
Tags: None
-
1_v8_merc
I know, I have a loud noise in my 82 GS650 G also.
It only does it in 3rd gear.
It sounds just like the gear is LOUD, kinda hard to describe it.
Sort of sound high, but clunky and low too.
-
Originally posted by gearhead13 View PostSo, I have put maybe 200kms on the new 1100 engine, and it makes a squealing, whining noise in 4th gear, and louder the more throttle I give it. All other gears are fine and it shifts through all gears fine. I do not know why the cases were split on this engine, maybe there was a shifting problem or somethingThe PO didnt say why or what was done to it, even if he could remember (24 years ago). Anyone know of a certain problem with 4th gear on these? I plan to run it for a few more hundred and if the noise hasnt gone away, then pull the bottom off and see what the problem is.
Comment
-
gearhead13
Well, I have the engine apart, what should I be looking for on the gears?
The engine only has 38k km on it. Third and fourth gears look pretty normal to me. Could it be the main gears that hold the shaft? I would think all gears would make noise then.
Would the noise have to be coming from the teeth themselves? They look ok and there are no sharp edges on them
Comment
-
Check the shifter forks for wear and straightness and the drums for wear.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment