Announcement

Collapse
No announcement yet.

gs 550l wiring harness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    gs 550l wiring harness

    hi guys i am restoring my first uk 82 gs550l, the wiring harness was shot ,and the only replacement one i could find was a usa spec one. Since i fitted this one the headlight has been switching on as soon as i switch on the ignition, i can then switch the sidelights on just fine but when i put the headlight switch on the light seems to short out.Are the two harness ment to be different, is the usa spec harness designed to put the light on all the time when the ignition is on. I would be really greatfull for any answers you guys can give. Also is there much work converting the usa harness if it is different.
    Last edited by Guest; 01-29-2010, 11:56 AM. Reason: spelling mistakes

    #2
    Can't answer about modifying the harness but yes, the US models are designed to light the headlamp all the time. Legal compliance thing. I believe the service manual on BassCliff's page has wiring diagrams you can compare for the diff editions.

    Comment


      #3
      My UK spec GS550E has a Canadian wiring harness, that I modified into UK spec, but retaining the electronic ignition from the Canadian.

      Having the wiring diagrams sure helps !!

      John

      Comment


        #4
        Yes, USA is headlight on all the time. A good service manual has the diagram for all the different countries.

        Comment


          #5
          hi guys thanks for the info , at least i know its not another bad harness
          Last edited by Guest; 01-31-2010, 04:14 PM.

          Comment

          Working...
          X