John
Announcement
Collapse
No announcement yet.
Brake Parts
Collapse
X
-
Detroit Diesel Man
Brake Parts
Is their any place I can get ALL of my brake rebuild kits...dont want to get everything from diff vendors but having a tough time finding a decent place to get everything from..Z1 doesnt carry everything,bike bandit is priced wayyy too high,old bike barn is just a pita to use their site and i cannoty for the life of me find a KL catalog to look up all the part numbers..any help would be great..Thanks
JohnTags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
K&L brake system parts suck. I have a bad master cylinder kit and other people have gotten bad caliper piston seals. Get OE parts from a source like babbits, Part Shark, Cycle Parts Nation, etc.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Suzuki_Don
-
Detroit Diesel Man
Thanks..going oem at cycle parts nation..better prices than bb and easier and quicker site to navigate..Thanks!
John
Comment
-
I bought kit's from Georgefix on Ebay. They were K&L and they worked fine.
These were for the front and rear calipers. I used OEM for the master cylinders.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
Originally posted by chef1366 View PostI bought kit's from Georgefix on Ebay. They were K&L and they worked fine.
These were for the front and rear calipers. I used OEM for the master cylinders.
Remember Jeff's brake calipers where the piston was binding? K&L caliper kits! He bought them brand new.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by Nessism View PostHey Bill,
Remember Jeff's brake calipers where the piston was binding? K&L caliper kits! He bought them brand new.
Did you install them or him?1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
Originally posted by chef1366 View PostOH
Did you install them or him?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment