Announcement

Collapse
No announcement yet.

'81 550L Airbox into a '79?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    '81 550L Airbox into a '79?

    So I'd rather not deal with trying to re-jet my bike for the stupid pods the PO put on it and just go back to a stock airbox. Problem is, the only one that claims to be for a '79 550L on ebay at the moment is 80 bucks plus shipping. There's several much cheaper ones for '80 and '81 GS550's, but will it fit? Looking at the part numbers on partshark it does appear that the number is slightly diffferent, but the picture looks the same.
    Sorry for asking what seems to be a silly question, but I can't seem to find an answer.

    If it turns out that won't fit, could somebody give me a hint as to how to go about re-jetting?

    Thanks!

    #2
    The airbox boots are different because Suzuki changed the carbs in 1980. Regarding your bike, I'd keep searching for the proper airbox. They come up often on ebay and also you might want to post in the Parts Wanted forum here.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Raise the needle a couple of notches and put a larger main jet in there. I'd start with two steps up. The jets go in 2.5 size increments but I consider a step at 5.
      EX. If you have a 115 main I'd go with a 125
      1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
      1985 GS1150ES stock with 85 Red E bodywork.

      Comment


        #4
        Great, thanks much for the info. I've worked on old VWs before, but I was more of a bus guy so it was always FI, still working on figuring out the whole carb thing.
        Any suggestions as to the best place to get jets? Starving college student so looking to save a few bucks as much as I can without getting junky parts.

        Comment


          #5
          I have jets. They may be Dynojet but they'll work. I have a set of 130s right here I'll send you. They are like 122.5 mikuni.
          1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
          1985 GS1150ES stock with 85 Red E bodywork.

          Comment

          Working...
          X