Electrical gremlins after 7 mths laid up

[Kcwiro]

here is the one I have but all the symbols on it mean absolutely nothing to me

No problem.....


->|- *it is two down from the 10A & has red box around it* on the bottom area of the dial.... not sure if you have a tone or not but if you use that mode and it displays '1' if your circuit is open

[Ricko19]

Thanks mate, thats brilliant Just the sort of newbie instructions I need until I get hold of this book.

I'll go and check the fuses. Is there anything else I should check for continuity while I'm at it?

Any suggestions on the cleaners?

[posplayr]

http://www.google.com/search?hl=en&s...aq=f&aqi=g7&oq=





How to Use a Voltmeter



http://www.ehow.com/how_16767_voltmeter.html



Voltmeter usage

http://www.allaboutcircuits.com/vol_6/chpt_2/1.html

2P : sing a multimeter

http://www.doctronics.co.uk/meter.htm

[posplayr]

here is the one I have but all the symbols on it mean absolutely nothing to me

this is a digtal volt meter

[Kcwiro]

Thanks mate, thats brilliant Just the sort of newbie instructions I need until I get hold of this book.

I'll go and check the fuses. Is there anything else I should check for continuity while I'm at it?

Any suggestions on the cleaners?

Besides for the awesome links just posted for you, I think that covers everything. You can always look for any volmeter manual, a lot outline what each symbol does. Any electrical contact cleaner spray will do, keep an eye out for the stuff that leaves no residue.

[Ricko19]

I knew it was a digital one and how to check a battery but thats about it. I haven't leaned what symbols to select for different tasks or where to put the probes yet.

Thanks for the links Posplayr - I've been reading a lot of them at the moment but some more definately won't hurt!

[Ricko19]

Thanks Kcwiro - will leave you guys alone for a while now and get started