Announcement
Collapse
No announcement yet.
Who's using Bandit Gauges?
Collapse
X
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13968
- London, UK to Redondo Beach, California
Thanks. Could be what I need for my 750
What year model of Bandit?
Thanks for the info!
DanLast edited by salty_monk; 02-23-2010, 10:46 PM.1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Billy Ricks
Tomorrow if I remember I'll take a close up of the back of my GSXR gauges for you guys. I have them hard wired into my harness since everything ends up exposed. It all looks clean if you keep your leads short. With the housing of the Bandit clocks things will be cleaner. Most will either hide there or the headlight bucket. You can pick up a set of female and male plug ends to mate the Bandit gauges to the GS harness. A 12 pin plug set should be enough.
Comment
-
Billy Ricks
Originally posted by nastyjones View PostOk, hooked everything up, then wired all my grounds together...........nothing. Fuses checked out fine.
Comment
-
Billy Ricks
If you came off the main harness things should be working. I once had a problem with my ignition switch not making contact properly in its guts and I didn't have power to lights and stuff. I'll give this some thought and get back to you.
Comment
-
AirCooledFour
More pictures please!
I'm interested in putting late model gauges on my '77 GS750. Can you folks post pictures of yours after instal?
Comment
-
Billy Ricks
Paul, the bulbs are all LED's. You might possibly need resistors for some odd reason but I doubt it, there aren't any showing on the diagram. I'd seperate the leads to each bulb and test them straight off the battery. You may have gotten hold of a gauge set that was part of a major electrical failure. I had an R/R boil my battery dry once and the resulting short took out just about everything in my gauge pod.
Comment
Comment