wheel fitment ?

[saltcitytattoo]

ok hi all first time posting here

ok so what i have going on is i am chopping out me 82 gs1100ez right now it is completely stock i am looking to see if 93 katana 600 wheels will fit with my stock swing arm (530 chain) and stock front forks?

would like to get a 150 to 160 in the rear i am not going for a sport bike more of a cruiser any info would be very greatly appreciated thanks in advance.

[BassCliff]

Greetings and Salutations!!

Hi Mr. saltcitytattoo,

I can't help you with your mods as I'm ecstatic just to keep my bike running well in its factory condition. I've got no creativity.

You're welcome to check in at the "Appearance Mods" section of the forum. Nowt let me welcome you to the GSR forum with a heapin' helpin' of "Howdy!" ...

Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

Thanks for joining us. Keep us informed.

Thank you for your indulgence,

BassCliff

[Big T]

You can get it in there, but it will take some work

[salty_monk]

If you're after some wheels give me a shout. I have one Chrome 4.5" complete with brand new bearings, brake rotor tire & sprocket that I might let go, a naked 4.5" with no brake or sprocket drive & a front that will match (not chrome & old tire on the front).

It will take some work but they will fit.