Thanks ahead of time guys.
Announcement
Collapse
No announcement yet.
Cheap Gasket source?
Collapse
X
-
Demonthrall
Cheap Gasket source?
'82 gs5500l. Does anyone know where I can get a cheap valve cover gasket? Mine is leaking. Also, what are those half moon things? Where can I get those if needed? The gasket is leaking out of one corner.
Thanks ahead of time guys.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35599
- Torrance, CA
Z1 Enterprises will have those parts. You can most likely use those half moon pieces as long as you put a skim coat of sealer on the curved surface before you reinstall them.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Demonthrall
Another option to is that I found some "all purpose" automotive gasket material at Ace hardware. Is this something I could use for this purpose? It seems kind of "papery", but it is a few mm thick. Thoughts?
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35599
- Torrance, CA
Originally posted by Demonthrall View PostAnother option to is that I found some "all purpose" automotive gasket material at Ace hardware. Is this something I could use for this purpose? It seems kind of "papery", but it is a few mm thick. Thoughts?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Demonthrall
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35599
- Torrance, CA
Originally posted by Demonthrall View Postthanks. Where can I get those half moons? Z1 enterprises doesnt seem to have them?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Demonthrall
Comment