Announcement

Collapse
No announcement yet.

fender bracket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    fender bracket

    Can someone show me a pic of the fender bracket I need to mount my front fender. I believe the front end is early 90's gsxr. It's on my 80 gs1100.
    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    #2
    Inverted fork Paul? If so I think I have one in the garage.

    Comment


      #3
      Heres the fender.
      80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

      Comment


        #4
        Hope this helps.

        Comment


          #5
          There should also be a thin metal plate under the fender. You can glue the nuts to the thin plate with weatherstripping adhesive to make mounting the fender easier. I might have one of the thin plates around here if you can't locate one.

          Comment


            #6
            This should work then, eh Billy?

            80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

            Comment


              #7
              Should work just fine. Once you get that you might want to consider having one made from thick aluminum. It also serves as a fork brace.
              Last edited by Guest; 03-07-2010, 09:16 PM.

              Comment


                #8
                but, there's a plate under the fender as well?
                80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

                Comment


                  #9
                  It's mainly there to prevent cracks from vibration. If you can't get the plate for under the fender make sure to use some fairly large washers under the nuts so the fender has more support.

                  Comment


                    #10
                    Ok, thanks
                    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

                    Comment


                      #11
                      If you cannot find one or make one thicker, i have 2 models here.
                      First and second gen gsxr.
                      But no underfender plate
                      Marc
                      https://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
                      1978 GS1000C X2
                      1978 GS1000E X2
                      1979 GS1000S
                      1979 gs1000
                      1983 gs400e

                      Comment

                      Working...
                      X