Announcement

Collapse
No announcement yet.

GS850G stalling question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS850G stalling question

    Hello,

    I recently bought and '82 850G with about 17,000 miles. I am the bikes second owner to my knowledge. The engine runs fairly strong in idle and throttle, however when i let off the throttle the bike often will stall. On top of this once it stalls it sometimes does not like to start again for another 20-30 minutes.

    Any advice on how to fix this would be greatly appreciated.

    -Tim Tom

    #2
    When was the last valve clearance check?
    1983 GS850G, Cosmos Blue.
    2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
    2015 Yamaha FJ-09, Magma Red Power Corrupts...
    Eat more venison.

    Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

    Celeriter equita, converteque saepe.

    SUPPORT THIS SITE! DONATE TODAY!

    Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

    Comment


      #3
      i'm not sure. i havent done it since i bought the bike, 2 months ago. could this be part of the problem?

      Comment


        #4
        bassclif

        you might want to read this.

        Comment


          #5
          first: Basscliff, thanks for the link, very useful information!

          Second:I was able to track down the previous owners service records and the last valve adjustment was done by the dealer about a month before i bought the bike. Also if this helps it only seems to stall at idle, when the bike is moving it doesn't seem to be an issue.

          Comment


            #6
            this may sound kinda silly but have you adjusted the throttle stop and cable correctly?

            Comment


              #7
              that could be possible and i hope its that simple. could also be difficult to know when it would be idling at the right speed as my tach doesnt work.
              I do think the cable adjustment by the handlebars isnt set right though. is the conical piece supposed to thread on to plastic bolt where the lock nut is?
              (i know that sounds like a very basic question but im new to the bike and havent gotten to know it inside and out yet)

              Comment


                #8
                Greetings and Salutations!!

                Hi Mr. Tim Tom,

                You'll find lots of GS850G lovin' on my website. Pay particular attention to the maintenance lists in the "mega-welcome". After you have checked, cleaned, replaced, maintained, etc, everything on those lists you will have an excellent motorcycle. Let me say "Howdy!"...

                Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...

                Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

                Thanks for joining us. Keep us informed.

                Thank you for your indulgence,

                BassCliff

                Comment

                Working...
                X